nerdnic Chuck Gliders!
You guys loved my nnChuckStang so I figured it would be a good idea to expand on the Chuck series!
nnChuck Cessna 172 - goo.gl/hN42B3
nnChuck F-16 - goo.gl/pFL47X
nnChuck B-17 - goo.gl/D8j78E
nnChuckSquito - goo.gl/QV9v9i
nnChuckSabre - goo.gl/BaKknV
nnChuck P-38 - LINK
9/1/2018 02:51:45 pm
I Made the b-17, It seemed to launch best from a wing throw. Its now in my tree. Lots of fun!
10/21/2018 07:43:15 pm
Thank you for the patterns. Made the Mosquito , the Mustang and the Sabre this weekend with the kids. That was fun. I think that we used crappy foam board however, so it may have affected the performance. We are in Costa Rica, so the selecton is limited. Still fun!
11/3/2018 11:54:27 pm
Thank you so much for the plans. My boys and I made the P51 this weekend and I just found these others! I am going to get the F-16 ready for my youngest to put together tomorrow.
3/11/2019 02:30:36 pm
3/18/2019 09:18:05 am
Love your designs, and I believe I am following your instructions on how to download and print, but all I get is one PDF of the whole plane , it isn't tiled. This is happening all 5 of the nnchuck plans I have downloaded. Thanks
5/14/2020 10:50:49 am
When you download the plans, just press print and then click the poster icon and it should print it tiled
11/15/2019 12:59:19 pm
I used to teach computer science..
11/25/2019 10:07:33 pm
If CG is 25% back from the leading edge of the wing and a quarter is 11 grams, 2 quarters are 22 grams. to get a slightly nose heavy , I used 6 1/4 ounce weights at 7 grams per quarter ounce is 42 grams...It seems very heavy. the horizontal stabilizer in the tail is very thick...I wonder if a depron tail wing might help.... This design has lots of promise but I would like to try building this with 3 mm depron and see how it balances out and in turn glides....The P-51 would glide but not very far. I played with the CG using 1/4 oz weights. These designs have great potential for public school but I am looking for gliding like white pages gliders, almost but in foam.
11/25/2019 08:20:58 pm
Raymond E Bertrand Jr
12/19/2019 10:31:46 am
Great job on the gliders and thanks for walking me through the printing process or I would not have been able to succeed.
6/5/2020 12:50:08 am
6/5/2020 06:45:56 am
3-6 will work. These plans were designed around 5mm foam.
11/11/2020 02:07:42 pm
I cannot get the plans to print to scale. I can only get it all on one page which is too small.
7/17/2021 12:10:34 pm
Was wondering how it would fly with a little AOA added to the wing slot in the fuselage.
3/17/2023 07:26:00 pm
how do you put the wing for the nnChuckSquito into the slot in the fuselage
3/17/2023 07:32:48 pm
and i you could send me a video that would be great
Leave a Reply.