nerdnicRC
  • FREE PLANS
  • Content
  • STORE
  • ABOUT

Rascal CNC | BUILD GUIDE

5/17/2018

5 Comments

 
Status: Work In Progress
Last updated: May 20th 2018
Picture

DETAILS

The Rascal CNC is a hobby grade CNC machine designed BY the Community FOR the Community with the simple goal of being able to cut foam board airplanes, for more details: CLICK HERE

Make sure you've got all your parts and Rascal Kit ordered before you get started.
PARTS LIST
RASCAL KIT

​PREP WORK

Baseboard
The Rascal mounts to a flat sheet of MDF or plywood. This baseboard should be 3/4"x42x42” minimum, but the thicker the better. Pick up a sheet from your local lumber store and then you'll need to seal your baseboard with one of the following:
​
  • Paint and polycrylic
  • Wood stain
​
It's critical that the baseboard is sealed to prevent it from warping over time. Lastly, frame the underside of your baseboard with 2x4s and mount it somewhere solid and permanent.
Picture

Read More
5 Comments

2200mm nnCorsair - BUILD

8/6/2017

5 Comments

 
BUILD STILL IN PROGRESS
Last update - June 24th 2018
​
I've been working on a Corsair now for some time. The design has been changed and re designed many times as I search for the right look and build style that's strong (gotta be able to handle speed) and straight forward to build. I finally settled on a new design method that I really like.


This new method uses a main rib that a few scale formers fix to. I then use foam to wrap the formers to give a fully scale fuse. For a time reference I started this build on November 18th 2016.
Picture

Read More
5 Comments

    Categories

    All
    BUILD
    Community Design
    FliteFest 2016
    How To Design Planes
    Mods
    Rascal CNC
    Sneak Peek
    Story Time
    Testing
    Tutorial

​SUBMIT A REQUEST | BETA PLANS | DESIGN TUTORIAL | RASCAL CNC
© 2020 nerdnicRC
  • FREE PLANS
  • Content
  • STORE
  • ABOUT