|
Status: Work In Progress Last updated: May 20th 2018  DETAILSThe Rascal CNC is a hobby grade CNC machine designed BY the Community FOR the Community with the simple goal of being able to cut foam board airplanes, for more details: CLICK HERE Make sure you've got all your parts and Rascal Kit ordered before you get started. PREP WORKBaseboard The Rascal mounts to a flat sheet of MDF or plywood. This baseboard should be 3/4"x42x42” minimum, but the thicker the better. Pick up a sheet from your local lumber store and then you'll need to seal your baseboard with one of the following:
It's critical that the baseboard is sealed to prevent it from warping over time. Lastly, frame the underside of your baseboard with 2x4s and mount it somewhere solid and permanent. 
6 Comments
|
