nerdnicRC
  • FREE PLANS
  • Content
  • STORE
  • ABOUT

nnChuckCat

Wing size isn't everything
Picture
nnChuckCat

The nnChuckCat proves that wing size isn't everything. This stubby little guy (16.5") is a good deal smaller than some of the other nnChucks, but it performs just as well! It is the perfect inside gilder and you'll love tossing it around.

​Make sure you check out the rest of my gliders HERE
  • Plans
  • Details
  • Build
<
>
Picture
Thanks for taking the time to build one of my designs! This one is modeled after the Grumman F8F Bearcat and I hope you enjoy it! Please share a picture of your build with me via email - me@nerdnic.com

NOTE If you're not sure how to download and print plans CLICK HERE
DOWNLOAD
DONATE $
​Version 1.0 | Released 05.22.2019
SPECS
WINGSPAN     16.5in | 420mm
FUSE               12.25in | 312mm
WEIGHT          1.23oz | 35g
CG                   3.9in | 10cm from nose


BUILD DIFFICULTY
✪✪✪✪✪ Beginner

​PILOT SKILL
✪✪✪✪ Beginner
MATERIAL LIST
(2) USD Nickel or 5g weight
(1)
Adams Readi-Board (20"x30")
(1) Hot glue
MATERIAL LIST
(2) USD Nickel or 5g weight
(1) 
Adams Readi-Board (20"x30")
​(1) Hot glue

​
1. Cut out pieces.
Picture
2. If you're building from a kit, glue the fuse half cut
Picture
3. Glue on the left side doubler.
Picture
4. Glue in (2) USD Nickels in nose.

NOTE: For my international friends, you need 10g of weight in the nose.
Picture
5. Glue on right side doubler.
Picture
6. Crease wing and glue in place.
Picture
7. Glue in horizontal stabilizer.
Picture
​SUBMIT A REQUEST | BETA PLANS | DESIGN TUTORIAL | RASCAL CNC
© 2020 nerdnicRC
  • FREE PLANS
  • Content
  • STORE
  • ABOUT