nnChuck L-39
High performance jet glider
|
nnChuck L-39
Say hello to this next level chuck glider! The nnChuck L-39 is a high performance jet glider in every way possible. With its strategic beveling and reinforcements, you won't find another DIY chuck glider with this level of looks or performance. Make sure you check out the rest of my gliders HERE |
|
Thanks for taking the time to build one of my designs! This one is modeled after the Aero L-39 Albatros and I hope you enjoy it! Please share a picture of your build with me via email - [email protected]
NOTE If you're not sure how to download and print plans CLICK HERE |
Version 1.0 | Released 10.12.2019
|
|
SPECS
WINGSPAN FUSE WEIGHT 25g CG 21cm from nose BUILD DIFFICULTY ✪✪✪✪✪ Intermediate PILOT SKILL ✪✪✪✪ Beginner |
|
1. Cut out pieces.
|
|
|
2. Remove paper from the highlighted areas.
|
|
|
3. Remove foam and glue BBQ Skewer in fuselage.
|
|
|
4. Bevel both nose side doubler pieces where the paper was removed until they look like the second photo.
|
|
|
5. Glue on one nose side doubler.
|
|
|
6. Glue in 1x USD Penny (2.5g).
|
|
|
7. Glue on the other nose side doubler.
|
|
|
8. Curve both tail side doublers. The outside of these pieces should still have the paper on.
|
|
|
9. Bevel the inside of both tail side doublers.
|
|
|
10. Glue on both tail side doublers.
|
|
|
11. Glue wing center line and set dihedral.
|
|
|
12. Glue in wing.
|
|
|
13. Glue in horizontal stabilizer.
|
|
